Reusable Tile Leveling System
• Easy to use for DIY operation
• Keep the tile balance on the same horizontal position
• Improve tile installation speed
• Reduce installer fatigue/stress
• Virtually lippage free, flat surface drastically
• Reduces the need for grinding and polishing
• Prevents tiles from moving while curing
• Save money
Material:PP + 430 Stainless Steel
Number:50 Sets/Bag + 1Pcs Tool
Suitable Spacer:2mm-8mm Spacer
Tile thickness: 5mm-20mm
50 Sets T Leveling System Sets + 1 Pcs Tool
1. Paving the first tile, Leave more than 2mm (use with cross spacer). Close to the tiles.
2. Insert the T-shaped needle along the gap in the tile.
3. Then 180-degree rotation, T-shaped needle stuck at the bottom of the two tiles.
4. Adjust the caps with your hand/special wrench until the two tiles are on the same level.
5. About 5~6 hours after leveling, Before cement/adhesive is completely dry, rotate caps in the reverse direction, remove 180° T-needle until the word, take out.
6. Installation Effect Show Avoid not to remove T tile leveling systems, Do three points best!!
One: Tile spacer is 2mm or more than 2mm.(Advice use with cross spacers)
Two: When leveling, It is necessary to clean the surrounding cement or tile adhesives of T-leveler.
Three: About 5-6 hours after leveling, Remove the T-leveler before tile adhesive or cement is not fully dried.